How to Clear and re-issue a Password on a MC200/MC200CAB & MC300

Once a password has been set, the password must be entered to allow access to selected user controls. If lost or forgotten, it can be cleared and re-instated.

Re-issue a Password

Once a password has been set, the password must be entered to allow access to selected user controls.
Once entered the password gives access to the User menu functions for 60 minutes.

Procedure
• From the home screen, press the ► button TWICE. ‘Date:’ appears.
• Make a note of the day and month.
The Password will be the day and the month REVERSED i.e. 20/08/2017 is 8002
• Press the ► button once until “Password XXXX” appears.
• Press the + or - button to enter the first digit.
• Press the ► button to select the next digit.
• Press the + or - button to enter the second digit.
• Press the ► button to select the next digit.
• Press the + or - button to enter the third digit.
• Press the ► button to select the next digit.
• Press the + or - button to enter the last digit.
• Press the button to save changes. VALID will appear briefly.
• Press the ► button to move back to the home screen.

If ‘FAIL’ appears on the screen, the incorrect password has been entered. Repeat entry sequence.


To re-apply the restrictions before the end of the 60 minute period:
• Press the ► button until “Password XXXX” appears.
• Press the button without entering any digits. The display will show ‘Password CLOSED’.